User guides - CMM products

Browse documents

• Installation & user's guide: RSP3
  

  Installation & user's guide: RSP3

  The RSP3 range of probes gives REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.5MB]
• Installation & user's guide: SFP1
  

  Installation & user's guide: SFP1

  No description available

  [1.6MB]
• Installation & user's guide: ACR3
  

  Installation & user's guide: ACR3

  Mounted within the CMM’s working envelope, the ACR3 is combined with the modular rack system (MRS) to form an automatic change rack for probes and extension bars that incorporate the Renishaw autojoint.

  [1.2MB]
• Installation & user's guide: MCU
  

  Installation & user's guide: MCU

  The manual control units are comprehensive CMM joystick controllers designed for use with Renishaw's universal CMM controller range.

  [1.0MB]
• Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2
  

  Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2

  No description available

  [1.1MB]
• Installation & user's guide: MRS
  

  Installation & user's guide: MRS

  This guide contains information on the Renishaw modular rack system (MRS) . In addition to providing an introduction and simplified explanation of the MRS, this guide also provides detailed installation instructions.

  [712kB]
• Installation & user's guide: NDI AUTOsense touch trigger module
  

  Installation & user's guide: NDI AUTOsense touch trigger module

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]
• Installation & user's guide: PH10 PLUS
  

  Installation & user's guide: PH10 PLUS

  Each of the heads in the PH10 PLUS motorised probe head range is a general purpose, versatile unit designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).

  [960kB]
• Installation & user's guide: PH10M-iQ PLUS
  

  Installation & user's guide: PH10M-iQ PLUS

  PH10M-iQ PLUS is a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installation & user's guide: Retrofit cabinet
  

  Installation & user's guide: Retrofit cabinet

  Renishaw's controller cabinet is a standard 19 inch rack mounting unit that is used for storing Renishaw's range of controllers, servo power amplifiers and interfaces. This cabinet provides a unique connection to the CMM resulting in a neat and tidy installation. As well as providing storage for all the Renishaw controller equipment the cabinet has an integral mains system with on/off switch.

  [684kB]
• Installation & user's guide: Thermal effect compensation for UCC1 and UCC2
  

  Installation & user's guide: Thermal effect compensation for UCC1 and UCC2

  No description available

  [620kB]
• User guide: SP25M, FCR25, ACR3 system
  

  User guide: SP25M, FCR25, ACR3 system

  Renishaw’s innovative SP25M is the world’s most compact and versatile scanning probe system and is actually two sensors in one - enabling the user to scan for form measurement or reverse engineering and as a touch-trigger probe (TTP) for geometric size and position measurement.

  [1.8MB]
• User guide: SP80 and SP80H
  

  User guide: SP80 and SP80H

  The SP80 system comprises the SP80 or SP80H ultra-high accuracy scanning probe, the probe interface and a rack system for stylus holder changing.

  [1.0MB]
• User guide: AM1
  

  User guide: AM1

  The AM1 adjustment module has been designed for use with the PH6M and MIH manual probe heads and the PH10T/M PLUS motorised probe heads.

  [159kB]
• User guide: Autochange system
  

  User guide: Autochange system

  Renishaw’s ACR1 is a fully integrated 8 port probe exchange system. Mounted within the CMM’s working envelope, the autochange system facilitates fast, automatic probe exchange without the need for re-qualification of the probe assembly.

  [2.4MB]
• User guide: HCU2
  

  User guide: HCU2

  No description available

  [224kB]
• User guide: MCG
  

  User guide: MCG

  Renishaw’s machine checking gauge (MCG) provides an easy way to monitor the volumetric measurement performance of your co-ordinate measuring machine (CMM). The MCG is an effective complement to existing standards for CMM verifi cation and can be used as an interim checking gauge in accordance with international standards BS EN ISO 10360-2.

  [538kB]
• User guide: MCG tools
  

  User guide: MCG tools

  MCG tools is an Microsoft Excel workbook that manages the machine checking gauge (MCG). MCG tools allows the user to generate a DMIS part program in order to execute the MCG test on a co-ordinate measuring machine (CMM). It can then import the MCG data to analyze and identify whether geometrical errors exist on the CMM. Also, the results from every MCG test can be archived in order to follow the evolution of the geometry of a CMM over time.

  [822kB]
• Manuale d'uso: Testa indexabile manuale MH8 [gen]
  

  Manuale d'uso: Testa indexabile manuale MH8

  Guida multilingua - EN / DE / FR / IT

  [163kB]
• User guide: MIH
  

  User guide: MIH

  MIH user's guide

  [1.1MB]
• User guide: PH6M
  

  User guide: PH6M

  No description available

  [371kB]
• User guide: PHS1
  

  User guide: PHS1

  The Renishaw servo positioning head (PHS1) is a 2-axis motorised head with continuous 360° servo drive enabling the probe confi guration to be positioned at almost any angle. This makes the head ideal for use in restricted spaces and enables styli to be angled normal to a surface or aligned to the axis of a hole.

  [1.4MB]
• User guide: REVO-2
  

  User guide: REVO-2

  REVO-2 is a dynamic measuring head and probe system from Renishaw. It is a revolutionary product designed to maximise measurement throughput whilst maintaining high system accuracy.

  [2.3MB]
• User guide: RTP20
  

  User guide: RTP20

  No description available

  [472kB]
• User guide: RVP
  

  User guide: RVP

  RVP is a non-contact vision measurement probe for use with the REVO-2 5-axis measurement system on co-ordinate measuring machines.

  [1022kB]
• Manuale d'uso: Tastatori touch trigger [it]
  

  Manuale d'uso: Tastatori touch trigger

  No description available

  [491kB]
• Manuale d'uso: TP20 [it]
  

  Manuale d'uso: TP20

  No description available

  [1.0MB]
• Manuale d'uso: TP200 tastatore [it]
  

  Manuale d'uso: TP200 tastatore

  No description available

  [294kB]
• User guide: TP7 high accuracy touch trigger probe system
  

  User guide: TP7 high accuracy touch trigger probe system

  No description available

  [412kB]
• User guide: TP8 manual indexable probe
  

  User guide: TP8 manual indexable probe

  TP8 manual indexable probe

  [197kB]
• Leaflet: User's leaflet: MRS adjustable footplates
  

  Leaflet: User's leaflet: MRS adjustable footplates

  The MRS rail can be placed at different heights from the CMM’s bed by using multiple MRS legs to provide the required clearance for long styli and extension bars. By using the optional MRS adjustable footplates shown below, the MRS rail can also be placed at different positions on the CMM’s bed thereby ensuring that a maximised working volume can be achieved.

  [56kB]
• Leaflet: User's leaflet: MRS heavy duty legs
  

  Leaflet: User's leaflet: MRS heavy duty legs

  Where an MRS installation has numerous SCP80s containing heavy stylus arrangements, or vertical stylus arrangements exceeding 190 mm, it is recommended that the optional MRS heavy duty leg kits are used to provide additional rigidity/height. These kits can be purchased separately to match the number of legs used on the MRS.

  [89kB]
• User instructions: TP20 and TP200 cleaning
  

  User instructions: TP20 and TP200 cleaning

  How to effectively clean the location faces of TP20 and TP200.

  [139kB]
• Leaflet: Upgrade brackets and blanking plates
  

  Leaflet: Upgrade brackets and blanking plates

  This leaflet details the bracket options available when upgrading or replacing Renishaw controllers and / or probe interfaces. By using a combination of the following brackets and / or blanking panels, any combination of existing and new Renishaw product can be mounted together inside a 19 inch cabinet rack. The bracket kits shown in this leaflet are supplied with all the necessary fixtures.

  [147kB]
• Leaflet: Instruction leaflet: PHS PC card
  

  Leaflet: Instruction leaflet: PHS PC card

  The PHS1 head has been equipped with a head temperature sensing facility to allow thermal compensation. Previously, the PC card was unable to read this information but a new card has been designed to accommodate this facility.

  [77kB]
• Reference guide: CMM cables
  

  Reference guide: CMM cables

  This guide contains comprehensive information on the most commonly used Renishaw cables. It is of particular use to engineers involved in installation or support of Renishaw equipment on CMMs, or where correct cable identification is required.

  [2.0MB]
• Manual: Switch and connector guide: Renishaw CMM products
  

  Manual: Switch and connector guide: Renishaw CMM products

  This guide contains information on switches, connectors and signals of conventional Renishaw interfaces and controllers. It is of particular use to engineers involved in installation, support or upgrade activities associated with Renishaw CMM products.

  [1.4MB]